|
|
|
If you have different PCB jobs to proceed but are prototype quantity to use, the save money on your fabrication costs is easily merging several PCB jobs together to be manufactured simultaneously on one panel. Because setup and tooling cost is usually per sheet of the film regardless of the material area we used, so if you can fit multiple copies of the PCB onto one sheet, you'll save money. |
|
|
|
Here's a case that we've made for your reference. |
|
1). 14 different PCB jobs onto one panel within 400 x 500mm |
|
2). Same material and Thickness. |
|
2). FR-4 Material, 1 oz copper. |
|
3). Double sided, 1.6mm thick. |
|
4). Green solder mask /white silkscreen |
|
5). Hot air level finishing |
|
|
|
|